|
|
 |
 No silver solder series |
 Low silver solder series |
 High silver solder series |
 Brass solder |
 Aluminum brazing |
 Flux |
|
 |
|
|
|
|
|
| |
| |
| CMC hardfacing fill mold argon welding series |
| 2015-8-31 |
|
|
CMC-SKD11-3 hardness HRC56 ~ 58 1.0 1.2 1.6 2.4
Welding cold steel, die, die cutting, cutting tools, molding, hard surface production, with high hardness, high wear resistance and toughness of argon welding.
CMC-SKD61-2 hardness HRC52 ~ 57 1.0 1.2 1.6 2.0 2.4 3.2
Welding forging die, fervent, hot die, thermal processing molding, hot work tool, die steel.
CMC-SKD61 hardness HRC42 ~ 46 0.9 1.2 1.6 2.4
Welding aluminum and copper die-casting mold, with good heat resistance, wear resistance, cracking resistance.
CMC-M3-2 hardness HRC61 ~ 63 1.2 1.6 2.0 2.4
Broach fill mold, high hot hardness tool mold, forging always die, hot die, screw die, abrasion hard surface, high-speed steel.
CMC-MS-3 500 degrees 2H age hardening hardness HRC48-50 1.2 1.6 2.0 2.4
Special hardened high toughness alloys, very suitable for aluminum gravity die casting, gate, extend the service life of 3 to 5 times, the mold can be made very sophisticated, super-mirror (gate repair welding, thermal fatigue crack use is not easy)
CmC-12Cr hardness HRC52 ~ 57 1.0 1.2 1.6 2.4 3.2
Dedicated to Cr12, Cr12MoV series of mold argon welding repair. Used before heat treatment, machining can be heat, when heat dimensional change is small, easy to crack. If welding must be more than three layers, available CMC-30N base. After the heat treatment for Cr12 small area time to preheat. Melting sufficient hardness can be machined.
CMC-S45H hardness HRC52 ~ 57 1.0 1.2 1.6 2.0 2.4 3.2
Dedicated to the edge of the mold making S45C wire. In view of the requirements for the cost of the mold industry, delivery of gradual changes in the market tight, the evolution of the mold edge production methods; in S45C made it very easy, A3, P20, such as mold steel locally, in order to strengthen the mechanical properties of welding and hardness, is mainly used in: fiberglass molds, sheet metal stamping die ... and other parts of the knife-edge
CMC-Magic1 hardened hardness HRC50 ~ 54 1.2 1.6 2.4
Extremely easy to crack, the higher carbon content available after the heat treatment of steel melting gold fine for tensile modulus can significantly reduce the high tensile steel and ordinary steel bending, stretching scratches molding |
|
Previous:CMC iron / backing argon welding series
|
|
|
|
